| 1. |
Plug the power cable to the router. You should see the Power LED at the front turn green now. |
| 2. |
Plug the network cable of WorldLink to the WAN port. Next, take the patch cable and plug one end of it to the LAN port of the Router and other end to the Network Card of the computer. |
| 3 |
Next, open the Web Browser (Firefox, Internet Explorer etc)
and type the Default IP
address of the router
(192.168.0.1) in the address
bar. |
| 4. |
It will ask for Router's
default “Username”
and “Password”.
Please provide Username as “admin”
and Password as “blank”. |
| 5. |
After providing username
and password, click on
“OK” button |
| |
|
|
|
| 6. |
Next, Router configuration
page will be displayed. |
| 7. |
Now, click on WAN
button at the left.
|
|
|
| |
|
| 8. |
Select the PPPOE
option |
|
|
| |
|
| 9. |
Type the Username and
Password provided
by WorldLink in
the Username and Password
Fields.
Now, change the
value under "MTU" field to 1492.
|
| 10. |
Click on “Apply”
button. (It will restart
the router). |
| 11. |
Click on “Continue”
button and the PPPoE connection
will be set. |
|
|
